Alternate setup method – Belkin F5D9630-4 User Manual

Page 29

Alternate Setup Method

1. User Name - Enter the user name (assigned by your ISP).

2. Password - Enter your password (assigned by your ISP).

3. Retype Password - Confirm the password (assigned by your ISP).

4. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier. (VCI) parameter here (assigned by your ISP).

5. Encapsulation - Select your encapsulation type (supplied by your
ISP) to specify how to handle multiple protocols at the ATM transport
layer.

VC-MUX: PPPoA Virtual Circuit Multiplexer (null encapsulation) allows
only one protocol running per virtual circuit with fewer overheads.

LLC: PPPoA Logical Link Control allows multiple protocols running
over one virtual circuit (more overhead).

6. MTU – Enter the MTU value for your ISP.

7. Dial on Demand - By selecting “Dial on Demand”, your Router will
automatically connect to the Internet when a user opens up a web
browser.

8. Idle Time (Minutes) - Enter the maximum idle time for the Internet
connection. After this time has been exceeded, the connection will be
terminated.

9. Use Static Default Route – Check this box and use the static
IP address your ISP assigns for your line. Use this option only if
instructed by your ISP.

Click “Apply Changes/Next” to save and activate your settings. To
go back to the original settings before saving, click “Clear Changes”;
or click any of the quick-navigation links for other options. Your new
settings will not be saved unless you click “Apply Changes/Next”.