Belkin F5D9630-4 - Manual (Page 67)

65
Manually Configuring Network Settings Manually Configuring Network Settings
65
Manually Configuring Network Settings
se
ct
io
n
2
1
3
4
5
6
7
8
9
10
12
5. If “Use the following IP address” (2) is selected, your Router will
need to be set up for a static IP connection type. Write the address
information the table below. You will need to enter this information into
the Router.
6. If not already selected, select “Obtain an IP address automatically”
(1) and “Obtain DNS server address automatically” (3). Click “OK”.
Your network settings are now configured for use with the Router.
Manually Configuring Network Settings in Windows 98 or Me
1. Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu.
2. Select “TCP/IP -> settings” for your installed network adapter. You
will see the following window.