Brother FAX-4750e - Manual (Page 9)

vii
ZleMFC-US-FAX-4750e/5750e-
Quick Reference Guide
Sending Faxes
Automatic Transmission
1
Place the original face down in the ADF.
2
Enter the fax number using One Touch,
Speed Dial, Search or the dial pad.
3
Press Fax Start .
Sending a Cover Page
1
Place the original face down in the ADF.
2
Press Menu , 2 , 2 , 8 .
3
When NEXT FAX ONLY appears,
press Set .
4
Press or to select ON
(or OFF ), and then press Set .
5
Press or to select a comment,
and then press Set .
6
Enter two digits to indicate the number
of pages being sent, and then press
Set .
7
Press 1 to select additional settings
— OR —Press 2 if you are ready to
fax.
8
Enter the fax number.
9
Press Fax Start .
Real Time Transmission
You can send faxes in real time.
1
Place the original face down in the
ADF.
2
Press Menu , 2 , 2 , 6 .
3
Press or to select ON , and
then press Set — OR —For the next
transmission only press or to
select NEXT FAX ONLY , and
then press Set .
4
For the next fax only, press or
to select ON , and then press Set .
5
Press 1 to select additional settings
— OR —Press 2 to fax.
6
Enter the fax number.
7
Press Fax Start .
Receiving Faxes
Select Receive Mode
There are three Receive modes:
FAX , TAD , and FAX/TEL .
Press Mode until the LCD shows
your selection. After two seconds
the LCD returns to the Data and
Time prompt and shows the new
mode.
Brother fax-back system:
In USA: 1-800-521-2846
Brother Global Web Site:
http://www.brother.com
Frequently Asked Questions (FAQs)
and Product Support:
http://solutions.brother.com
Brother Accessories & Supplies :
In USA:
1-888-879-3232 (voice)
1-800-947-1445 (fax)
http://www.brothermall.com
In Canada:
1-877-BROTHER (voice)
Q U I C K R E F E R E N C E G U I D E