Brother FAX-4750e - Manual (Page 55)

4 - 7 I N I T I A L S E T U P
ZleMFC-US-FAX-4750e/5750e-
Setting Volume Amplify (For the Hearing-Impaired)
Please carefully read Choosing the Handset Volume (For Volume Amplify) , on page
4-6 before you do the following steps:
1
Press Menu, 1, 4, 5.
2
If none of the users are hearing-impaired,
press
or to select
VOL AMPLIFY:OFF? and then press
Set, and then go to Step 4—OR—
If some or all of the users are hearing-
impaired, select VOL AMPLIFY:ON?
and then press Set.
3
If all the users are hearing-impaired,
press
or to select
PERMANENT? and then press Set
—OR—If only some of the users are
hearing-impaired, select
TEMPORARY? and then press Set.
4
Press Stop/Exit.
Memory Storage
In the event of a power failure, all menu settings are stored permanently:
GENERAL SETUP, SETUP RECEIVE, SET AUTO DIAL, REMOTE
FAX OPT plus the COVERPG SETUP and COVERPG MSG (from SETUP
SEND). You may have to reset the date and time.
FAX-4750e and FAX-5750e have a Memory Backup feature;
after a power failure all faxes in memory will be saved for several days.
Turning On Automatic Daylight Savings Time
You can set the machine to change automatically for Daylight Savings Time.
It will reset itself forward one hour in the Spring and back one hour in the Fall.
1
Press Menu, 1, 6.
2
Press or to select ON (or OFF),
and then press Set.
3
Press Stop/Exit.
5 . V O L U M E A M P L I F Y
V O L A M P L I F Y : O N ?
S E L E C T <- -> & S E T
P E R M A N E N T ?
S E L E C T <- -> & S E T
T E M P O R A R Y ?
S E L E C T <- -> & S E T
6 . A U T O D A Y L I G H T