Neff B45C52N3GB - Manual (Page 10)

10
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
how to fill and empty the water tank
■
when your appliance switches off automatically
Switching on the appliance
Press the operating mode selector to make it pop out.
This switches on the appliance, and it is now ready for use.
The ~ symbol lights up.
Selecting operating mode and temperature
:
Risk of scalding!
by hot water. The water in the water tank may become hot.
Empty the water tank before starting operating modes that are
not steam-assisted.
Notes
■
You can only start the / Low-temperature cooking operating
mode when the oven has cooled down. There must be no
residual heat ( • or œ ) showing in the temperature display.
■
For steam-assisted applications, you must fill the water tank
(see section: Filling and emptying the water tank).
1. Switch on the appliance.
2. Turn the operating mode selector until the desired operating
mode is selected.
3. Turn the temperature selector to change the default
temperature.
Note: If no default temperature is displayed, the temperature
of your selected operating mode is set permanently. You
cannot change this temperature.
4. Press the ƒ Start button.
Notes
■
Depending on the operating mode that you have selected,
you will hear a pumping noise after the operation has started.
The appliance is checking whether the pumps are working
correctly.
■
If you cannot start a steam-assisted application, check
whether the water tank has been filled and fully inserted.
Changing the operating mode
1. Turn the operating mode selector until the desired operating
mode is selected.
2. Turn the temperature selector to change the temperature.
3. Press the ƒ Start button.
Current temperature
Press the
± info button. The current temperature appears for
3 seconds.
Note: The current temperature can only be displayed with
operating modes with a default temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (figure A)
■
Appliance reheating (figure B)
Operating mode Default temper-
ature in °C
Temperature
range in °C
3 CircoTherm®* 160 40 - 220
% Top/bottom heat* 170 50 - 275
0 Circotherm intensive* 220 50 - 275
4 Circo-roasting* 170 50 - 250
+ Full-surface grill
+ Full-surface grill (inten-
sive)**
220 50 - 275
Fixed setting
( Centre-area grill
( Centre-area grill (inten-
sive)**
180 50 - 275
Fixed setting
$ Bottom heat 200 50 - 225
/ Low-temperature cooking Fixed setting ь ь ь
“ CircoTherm® eco 160 40 - 200
z Oven cleaning Fixed setting ‹
ä Reheating 120 80 - 180
* You can activate steam for this operating mode
** Turn the temperature selector beyond 275 °C.
‚Ÿ£ appears
in the temperature display
$ %