Neff C44L20N3GB - Manual (Page 12)

12
Basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
If you want to cancel all the changes, you can restore the
factory settings.
1. Press the ~ main switch to turn on the appliance.
2. Press and hold the o button for 3 seconds to go to the basic
settings menu.
™‚ ‚ appears in the display.
3. Press the o button repeatedly until the current basic setting
for the corresponding sub menu is displayed.
4. Turn the rotary selector to change the basic setting.
5. Press and hold the o button for 3 seconds to exit the basic
settings menu.
The change is saved.
You can change the following basic settings:
˜ ˆ Basmati rice max. 0.45 kg solid cooking container 2
˜ ‰ Brown rice max. 0.45 kg solid cooking container 2
˜ Š Couscous max. 0.45 kg solid cooking container 2
˜‚‹ Lentils max. 0.4 kg solid cooking container 2
˜‚‚ Steam fresh chicken breast total weight 0.2 - 1.2 kg perforated +
solid cooking container
2
1
˜‚ƒ Steam whole, fresh fish 0.3 - 1.5 kg perforated +
solid cooking container
2
1
˜‚„ Steam fresh fish fillet max. 2.5 cm thick perforated +
solid cooking container
2
1
˜‚… Fruit compote - solid cooking container 2
˜‚† Rice pudding - solid cooking container 2
˜‚‡ Yogurt in glass jars - jars +
solid cooking container
2
˜‚ˆ Reheat cooked side dishes solid cooking container 2
˜‚‰ Sterilise bottles solid cooking container 1
˜‚Š Hard-boiled eggs eggs, size M, max. 1 kg perforated +
solid cooking container
2
1
˜ƒ‹ Soft-boiled eggs eggs, size M, max. 1 kg perforated +
solid cooking container
2
1
Programme Remarks Ovenware/accessories Level
Basic setting menu
Submenu
Basic setting Setting
symbol
Audible signal when
button is pressed
Audible signal off ™‚ ‹
Audible signal on ™‚ ‚
Audible signal when
operation ends
Short audible signal (30 sec-
onds)
™ƒ ‚
Medium audible signal (2
minutes)
™ƒ ƒ
Long audible signal (10 min-
utes)
™ƒ „
* Factory setting:
■
all changes to the basic settings are deleted
■
automatic calibration is carried out again
The appliance is restored to the factory setting if you select
™ˆ ‚ and then press and hold the o button for 4 seconds.
Auto start: not neces-
sary to restart after
opening the appli-
ance door
Auto start off ™„ ‹
Auto start on ™„ ‚
Water hardness
range for the descal-
ing indicator
softened ™… ‹
soft (I) ™… ‚
medium (II) ™… ƒ
hard (III) ™… „
very hard (IV) ™… …
Audible signal for
end of heating up
Auto start off ™† ‹
Auto start on ™† ‚
Adjust the cooking
results in the pro-
grammes individually
Cooked normally ™‡ ‚
Less thoroughly cooked ™‡ ƒ
More thoroughly cooked ™‡ „
Restore the appli-
ance to the factory
setting*
Do not restore ™ˆ ‹
Restore ™ˆ ‚
Basic setting menu
Submenu
Basic setting Setting
symbol
* Factory setting:
■
all changes to the basic settings are deleted
■
automatic calibration is carried out again
The appliance is restored to the factory setting if you select
™ˆ ‚ and then press and hold the o button for 4 seconds.