Neff C44L20N3GB - Manual (Page 10)

10
The cooling fan may continue running when you open the
appliance door.
After each use
Emptying the water tank.
Empty the water tank after each use:
1. Pull the water tank out of the appliance slowly, keeping it
horizontal, so that no remaining water can drip out of the
valve.
2. Empty out the water.
3. Thoroughly dry the water tank and the tank recess in the
appliance.
Drying the cooking compartment
:
Risk of scalding!
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
Leave the appliance door ajar until the appliance has cooled
down.
Use the enclosed cleaning sponge to empty the evaporator
dish after every cooking operation. Otherwise, the dish may
overflow during the next cooking operation.
Wipe the cooled cooking compartment and the evaporator dish
with the enclosed sponge and dry well with a soft cloth.
Wipe units and handles dry where condensation has built up.
Timer
You can use the Q timer as an egg timer or kitchen timer. The
appliance does not switch off automatically.
1. Press the KJ clock function button repeatedly until the KJ
and Q symbols light up.
2. Set the timer duration using the rotary selector.
The setting is applied automatically. Then the clock is
displayed again and the timer starts counting down.
Changing the time of day
There must be no clock functions set (cooking time or timer).
1. Press the KJ clock function button repeatedly until the KJ
and 3 symbols light up.
2. Change the time with the rotary selector.
3. Press the KJ clock function button.
The change is applied.
Switching the clock display on and off
1. Press and hold the KJ clock function button for 6 seconds.
The clock display switches off.
2. Press and hold the KJ clock function button.
The clock display switches on.
Automatic programmes
You can prepare food really easily with 20 different
programmes.
In this section, you will find out
■
how to set one of the automatic programmes
■
hints and tips on the programmes
■
which programmes you can set
Setting a programme
Select the correct programme from the programme table.
Follow the instructions for the programmes.
1. Press the ~ main switch to turn on the appliance.
2. Press the o button.
The first programme ˜ ‚ appears in the display.
3. Turn the rotary selector to set the required programme.
4. Press the o button again.
A default weight appears in the display.
If a signal sounds, you do not need to enter a weight for this
programme.
3 NJ
3 NJ
3 NJ