Brother HL-1850 - Manual (Page 43)

39
EXAMPLE
You can choose to align the text in one of three ways. In addition, if the Length function was
used to set the length of the label, the text will align within the label according to the selected
horizontal alignment setting.
The default horizontal alignment setting is LEFT; however, two other settings are also availa-
ble.
To change the horizontal alignment setting:
1 Rotate + until 10/18 ALIGNMENT is displayed, and then press + to display the
current horizontal alignment setting.
To select the HALF tape margin setting:
1 While holding down c , press E once,
and keep c held down.
2 While still holding down c , continue press-
ing E until HALF is displayed.
3 Release c .
LEFT RIGHT
CENTRE
F U L L
T A P E
H A L F
T A P E
HORIZONTAL ALIGNMENT FUNCTION