Brother HL-1850 - Manual (Page 22)

18
To set the tab length:
1 Rotate + until 08/18 TAB LENGTH is displayed, and then press + (OR hold down
c and press W once). The current tab length is displayed.
2 Rotate + (OR press h or e) until the desired length is displayed, or use the
number keys to type in the length.
3 Press + (OR press r).
To add a tab to the text:
● Hold down c and press Q once. The tab mark ( ) appears in the text to indi-
cate the position of the tab.
☞
If the text in front of a tab extends past the point where the next section of text
should start, the text will instead start at the following tab position.
For example, if the tab length is set to 3.0 cm and the following text is typed in:
the label shown below will be printed.
EXAMPLE
To set the tab length to 2.0 cm:
1 Rotate + until 08/18 TAB LENGTH is dis-
played, and then press + (OR hold down
c and press W once).
2: J K L M N O P Q R S T U
1: A B C D E F G H I
Margin Tab (3.0 cm) Tab (3.0 cm) Margin
5 . O c m
T A B L E N G T H