Brother HL-1850 - Manual (Page 35)

31
☞
With the AUTO setting selected and 12-mm- or 18-mm-wide tape installed, text consist-
ing of just one line of only uppercase letters (and no accented characters) will be printed
with a character size slightly larger than a similar sentence also containing lowercase
letters (i.e., 29 points for 12-mm-wide tape and 52 points for 18-mm-wide tape).
To change the size setting:
1 Rotate + until 02/18 SIZE is displayed, and then press + to display the current size
setting.
2 Rotate + until the desired size setting is displayed, and then press + to apply it to the text.
OR
1
While holding down c, press 2 once, and keep c held down to display the
current size setting.
2 While still holding down c, continue pressing 2 until the desired size setting is
displayed.
3 Release c to apply the selected size setting to the text.
Size
setting
(in points)
Wide setting
OFF
Wide setting
ON
6
9
12
18
24
36
42