Nokia 6100 User Manual
Page 85
[ 76 ]
Write down some information
1
Write down your voice mailbox number.
2
Call and check your voicemail as you normally would.
3
Write down your interaction with the recorded prompts step-by-step.
Keep in mind that each voicemail service may vary. However, it should
look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press
1234, press pound key.
Important: Be precise, you’ll need this information in “Setup
voicemail with dialing codes” later in this section.
LEARN HOW TO INSERT DIALING CODES
Press
a
repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the
dialing string.
For example, press
a
four times to display the “w” (wait character).
Pause briefly and the wait character is inserted into the dialing string.
Available dialing codes are as follows:
Setup voicemail with dialing codes
1
At the
Start screen, press Names, scroll to 1-touch dialing, and
press Select.
2
Scroll to an empty 1-touch dialing slot and press Assign.
3
Enter your voice mailbox number, including the area code.
Dialing codes
*
Bypasses a set of instructions
+
Precedes an international telephone number
p
Pauses for 2.5 seconds before sending any numbers that follow
w
Wait. Your phone waits for you to press
t
before it sends any
numbers or codes that follow.