Nokia 6255i - Manual (Page 89)

88 Copyright © 2004 Nokia
■ Infrared
You can set up the phone to receive data through its IR port. To use an IR connection,
transmission and reception must be to or from an IR compatible phone or device.
Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with other
IR devices. This device is a Class 1 laser product.
Send and receive data
1. Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices.
The preferable distance between the two devices in an IR connection is from 3
inches to 3 feet.
2. Activate IR in your phone by selecting Menu > Settings > Connectivity >
Infrared .
3. The user of the other device should activate IR as well.
If data transfer is not started within two minutes after the activation of the IR port,
the connection is cancelled and must be restarted.
Connection indicator
• When is shown continuously, the IR connection is activated and your
phone is ready to send or receive data using its IR port.
• When blinks, your phone is trying to connect to the other device or a
connection has been lost.
■ USB data transfer
You can transfer data such as music, photos and videos from your phone to a
compatible PC, or from a compatible PC to your phone using a DKU-2 USB data
cable. The cable is connected to your phone correctly when the arrowhead points
toward the mini display screen, or the display screen if the fold is opened.
Important: Disconnect the USB data cable from the phone to make a call.