Nokia 6255i - Manual (Page 68)

67 Copyright © 2004 Nokia
Settings (Menu 7)
Save information
1. At the start screen, select Menu > Settings > Call settings > Calling card .
2. Enter your lock code, and press OK . See “Security settings”, page 72 for
more information.
3. Scroll to one of the four card memory locations, and select Options > Edit > OK >
Dialing sequence .
4. Select one of the following sequence types:
Access no.+ phone no.+ card no. —Dial 1-800 access number, phone number,
then card number (+ PIN if required)
Access no.+ card no.+ phone no. —Dial 1-800 access number, card number (+ PIN
if required), then phone number
Prefix+ phone no.+ card no. —Dial the prefix (numbers that must precede the
phone number) and phone number you want to dial, then card number (+ PIN if
required)
5. Enter the required information (access number or prefix and card number), and
press OK to confirm your entries.
6. Select Card name .
7. Enter the card name, and press OK .
Make calls
After you have saved your calling card information in your phone, you can make a
call using your calling card.
1. At the start screen, select Menu > Settings > Call settings > Calling card .
2. Enter your lock code, and press OK . See “Security settings”, page 72 for
more information.
3. Scroll to the calling card of your choice, select Options > Select > OK .
4. Press the End key to return to the start screen; then enter the phone number,
including any prefix (such as 0 or 1) that your calling card may require when you
make a calling card call.
See your calling card for instructions.
5. Press and hold the Call key for a few seconds until Card call is displayed.
6. When you hear the tone or system message, press OK .