Nokia 6600 - Manual (Page 90)

Nokia 6600 User Guide 77 Copyright © 2004 Nokia
Tools
• Voice commands are sensitive to background noise. Record and use them in a
quiet environment.
• Very short voice commands are not accepted. Use longer words and avoid
similarities between different voice commands.
Note: You must say the voice command exactly as you said it when you
recorded it. This may be difficult in, for example, a noisy environment or
during an emergency, so you should not rely solely upon voice commands
in all circumstances.
Adding a voice command to an application
1 In the Voice commands main view, scroll
to the application that you want to add a
voice command to, and select
Options →
Add voice command .
To add a voice command to a profile, the
Profiles folder must be opened and a specific
profile selected.
2 The text Press ’Start’, then speak after tone
is displayed.
• Press Start to record a voice command.
The phone sounds a starting tone and
the note
Speak now is displayed.
3 Say the voice command. The phone will stop recording after approximately
5 seconds.
4 After recording, the phone plays the recorded command and the note
Playing voice command is displayed. If you do not want to save the
recording, press Quit .
5 When the voice command has been successfully saved, the note Voice
command saved is displayed and a beep sounds. A symbol can be
seen next to the application.
ADDING AN APPLICATION TO THE LIST
Assign voice commands to other applications that are not listed in the Voice
commands main view.
1 In the Voice commands main view, select Options → New application .
2 Available applications are displayed. Scroll to the application that you want to
add and press
Select .
3 Add a voice command to the new application. See “Adding a voice command
to an application” on page 77.