Nokia 6600 User Manual

Page 114

Nokia 6600 User Guide

101

Connectivity

The phone starts to search for devices within
range. Devices using Bluetooth technology that
are within range start to appear on the display
one by one. You can see a device icon, the
device’s name, the device type, or a short name.
Paired devices are shown with

. A paired

device is one where a Bluetooth connection
already exists between your phone and the
other device.

•

To interrupt the search, press

Stop

. The

device list freezes and you can start to
form a connection to one of the devices
already found.

When searching for devices, some devices may show only the unique device
addresses. To find out the unique address of your phone, enter the code
*#2820# in standby mode.If you have searched for devices earlier, a list of the
devices that were found previously is shown first. To start a new search, select

More devices

. If you switch off the phone, the list of devices is cleared and the

device search needs to be started again before sending data.

Scroll to the device you want to connect with and press

Select

. The item you

are sending is copied to Outbox and the note

Connecting

is shown.

Pairing (if not required by the other device, go to step 6)

•

If the other device requires pairing before data can be transmitted, a tone
sounds and you are asked to enter a passcode.

•

Create your own passcode (1-16 characters long, numeric) and agree with the
owner of the other device to use the same code. This passcode is used only
once and you do not have to memorize it.

•

After pairing, the device is saved to the Paired devices view.

When the connection has been successfully established, the note

Sending data

is shown.

Data received via Bluetooth can be found in the Inbox folder in Messaging.
See “Inbox - receiving messages” on page 51.

Pairing means authentication. The users of the devices using Bluetooth technology
should agree together what the passcode is, and use the same passcode for both
devices in order to pair them. Devices that do not have a user interface have a
preset passcode.