Nokia 6600 - Manual (Page 21)

Nokia 6600 User Guide 8 Copyright © 2004 Nokia
IF THE PHONE REQUESTS A LOCK CODE:
• Key in the lock code (displayed as *****) and press .
The factory setting for the lock code is 12345. For more information on the access
codes, see the ’Tools’ chapter.
Setting the time and date
Use the number keys - to key in first the current time and then the
date. Press to accept the settings.
• STANDBY MODE
The indicators described below are shown when the
phone is ready for use, with no characters keyed in.
In this state, the phone is in ‘standby mode’.
A Shows the signal strength of the cellular network
at your current location. The higher the bar, the
stronger the signal. The antenna symbol
is
replaced with the GPRS symbol when GPRS
connection has been set to When available and a
connection is available in the network or in the
current cell. See “Packet data (General Packet
Radio Service, GPRS)” on page 67 and “GPRS” on
page 70.
B Shows an analog or a digital clock. See “Date and time” on page 71.
C Indicates in which cellular network the phone is currently being used.
D Shows the battery charge level. The higher the bar, the more power left in
the battery.
E Navigation bar: shows the currently active profile. If the selected profile is Normal ,
the current date is displayed instead of the profile name. “Navigation bar - moving
horizontally” on page 11.
F Shows the current shortcuts assigned for the selection keys and .
G Background image: You can select any image to be used as a background image
in standby mode. See “Themes” on page 80.
Your phone has a screen saver. If there are no actions for one minute, the display
is cleared and a screen saver becomes visible. To deactivate the screen saver, press
any key. See “Themes” on page 80.