Nokia 6600 - Manual (Page 37)

Nokia 6600 User Guide 24 Copyright © 2004 Nokia
Before using voice dialing, note that:
•
Voice tags are not language dependent. They are dependent on the
speaker's voice.
• Voice tags are sensitive to background noise. Record and use them in a
quiet environment.
• Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: You must say the name exactly as you said it when you recorded
it. This may be difficult in, for example, a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
Adding a voice tag to a phone number
Voice tags can only be added to phone numbers stored in the phone’s memory.
See “Copying contacts between the SIM card and phone memory” on page 22.
1 In the Contacts main view, scroll to the contact that you want to add a voice
tag to, and press
to open the contact card.
2 Scroll to the number that you want to add the voice tag to, and select
Options
→
Add voice tag .
3 The text Press Start’, then speak after tone is displayed.
• Press Start to record a voice tag. The phone sounds a starting tone and the
note Speak now is displayed.
4 Say the voice tag. The phone will stop recording after approximately 5 seconds.
5 After recording, the phone plays the recorded tag and the note Playing voice
tag is displayed.
6 When the voice tag has been successfully saved, the note Voice tag saved is
displayed and a beep sounds. A symbol can be seen next to the number in
the contact card.
Making a call using a voice tag
1 In standby mode, press and hold . A short tone is played and the note
Speak now is displayed.
2 When you are making a call by saying a voice tag, hold the phone at a short
distance away from your mouth and face and say the voice tag clearly.
3 The phone plays the original voice tag, displays the name and number, and
after a few seconds dials the number of the recognized voice tag.
• If the phone plays the wrong voice tag, or to retry voice dialing, press Retry .