Nokia 6600 - Manual (Page 22)

Nokia 6600 User Guide 9 Copyright © 2004 Nokia
General information
Indicators related to actions
One or more of the following icons may be shown when the phone is in standby mode:
- Indicates that you have received new messages to the Inbox in Messaging.
If the indicator is blinking, the phone memory is low and you must delete some
data. See “Memory low” on page 108.
- Indicates that you have received new e-mail.
- Indicates that you have received one or several voice messages. See “Calling
your voice mailbox” on page 16.
- Indicates that there are messages waiting to be sent in Outbox.
See “Messaging - General information” on page 42.
- Shown when Ringing type has been set to Silent , Message alert tone to Off ,
and IM alert tone to Off in the currently active profile.
- Indicates that the phone’s keypad is locked. See the Getting Started guide.
- Indicates that you have an active alarm.
- Indicates that Bluetooth is active. When data is transmitted via Bluetooth,
is shown.
- Indicates that all calls to the phone are forwarded. - Indicates that
all calls to the phone are forwarded to a voice mailbox. See “Settings for call
forwarding” on page 19. If you have two phone lines, the forward indicator for the
first line is
and for the second line . See “Line in use (network service)”
on page 66.
- Indicates that you can make calls using phone line 2 only (network service).
See “Line in use (network service)” on page 66.
Data connection indicators
• When an application is establishing a data connection, one of the indicators
below blinks in standby mode.
• When an indicator is shown continuously, the connection is active.
for a data call, for a high speed data call,
The GPRS symbol is shown instead of the antenna symbol when there is an
active GPRS connection, when there are multiple GPRS connections, and for
when the GPRS connection is put on hold during voice calls.
for a fax call,
for a Bluetooth connection, and
for an infrared connection.