Nokia 6600 - Manual (Page 81)

Nokia 6600 User Guide 68 Copyright © 2004 Nokia
CREATING AN ACCESS POINT
Options in the Access points list: Edit , New access point , Delete , Help ,
and Exit .
You may have preset access point settings in your phone. Or, you may receive
access point settings over the air from a service provider.
If there are no access points defined when you open Access points , you will be
asked if you want to create one.
If there already are access points defined, to create a new access point, select
Options → New access point and select:
• Use default settings to use the default settings. Make the needed changes and
press Back to save the settings.
• Use existing settings to use existing setting information as the basis for the
new access point settings. A list of existing access points is opened. Select one
and press
OK . Access point settings are opened with some fields already filled.
Editing an access point
When you open Access points, the list of already
available access points opens. Scroll to the access
point you want to edit, and press
.
Options when editing access point settings:
Change , Advanced settings , Help , and Exit .
ACCESS POINTS
Here you can see a short explanation for every
setting that may be needed for different data
connections and access points.
Start to fill in the settings from the top because
depending on what data connection you select (
Data bearer ) only certain setting
fields are available.
• Connection name - Give a descriptive name for the connection.
• Data bearer - The options are GPRS , Data call , and High speed (GSM) .
Depending on what data connection you select, only certain setting fields are
available. Fill in all fields marked with
Must be defined , or with an asterisk.
Other fields can be left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service provider must support
this feature, and if necessary, activate it for your SIM card.
• Access point name (for packet data only) - The access point name is needed to
establish a connection to the GPRS network. You obtain the access point name
from your service provider.