Nokia 6651 - Manual (Page 95)

Nokia 6651 User Guide 85 Copyright © 2004 Nokia
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere
with other IR devices. This device is a Class 1 Laser product.
SENDING AND RECEIVING DATA USING INFRARED
• Ensure that the infrared ports of your phone and the other device are
pointing at each other and that there are no obstructions between
the devices.
The preferable distance between the two devices in an infrared
connection is three feet at the most.
• To receive data, activate the infrared port of your phone by pressing
Menu in standby mode and by selecting Connectivity and Infrared .
Ask the user of the sending phone to start the data transfer.
• To send data from your phone, select the function from which you
want to send data over the infrared connection.
For example, to send a calendar note when you are viewing it in the
Calendar menu, press Options and select Send note and Via infrared .
If data transfer is not started within two minutes after the activation of
the infrared port, the connection is cancelled and has to be started again.
CHECKING THE STATUS OF THE INFRARED CONNECTION
• When is shown continuously, the infrared connection is active
and your phone is ready to send or receive data using its infrared port.
• When blinks, your phone is trying to connect to the other device
or the connection has been lost.
GPRS
In this menu you can define when the phone connects to the GPRS
network (network service). You can also define the GPRS settings for using
the phone as a modem with a PC (network service).
To access this menu, press Menu in standby mode, and select Connectivity
and GPRS .