beautypg.com

Camera settings, Still image camera settings, Color and lighting settings – Nokia N85 User Manual

Page 82: Ca mera

background image

an account for a compatible online album).

See "

Share images and videos online ," p. 92.

To return to the viewfinder to record a new video

clip, press the capture key.

Camera settings

There are two kinds of settings for the camera: setup

settings and main settings. The setup settings return

to the default settings after you close the camera, but

the main settings remain the same until you change

them again. To adjust the setup settings, use the

options in the active toolbar.

See "Color and lighting

settings," p. 82.

To change the main settings, in the

image or video mode, select

Options

>

Settings

.

Still image camera settings

To change the main settings, in the image mode, select

Options

>

Settings

and from the following:

Image quality

— Set the resolution (main camera

only). The better the image quality, the more

memory the image consumes.

Add to album

— Save the image to an album in

Photos.

Record location

— To add GPS location coordinates

to each image file, select

On

. Receiving a GPS signal

may take time or the signal may not be available.

Show captured image

— Select whether to view

the captured image after it is taken or to continue

image capturing immediately.

Default image name

— Define the default name

for the captured images.

Extended digital zoom

— The setting is only

available in the main camera.

On (continuous)

allows the zoom increments to be smooth and

continuous between digital and extended digital

zoom,

On (paused)

allows the zoom increments to

pause at the digital and extended digital step point,

and

Off

allows a limited amount of zoom while

retaining the image resolution. Use the extended

zoom only when getting closer to the subject is

more important than the final image quality. The

overall quality of a digitally zoomed image is always

lower than that of an unzoomed image.

Capture tone

— Set the tone that sounds when you

capture an image.

Memory in use

— Select where to store your

images.

Restore camera settings

— Restore the camera

settings to default values.

Color and lighting settings

In the active toolbar, select from the following:

Flash mode

( ) (image only) — Select the desired

flash mode.

Color tone

( ) — Select a color effect.

82

Ca

mera