Nokia N85 - Manual (Page 42)

Messaging. Messages received through Bluetooth
connectivity are indicated by .
Tip: If your device notifies you that the memory
is full when you try to receive data through
Bluetooth connectivity, change memory card as
the memory where the data is stored.
Block devices
Press , and select Tools > Bluetooth .
To block a device from establishing a Bluetooth
connection to your device, scroll right to open Paired
devices . Select a device you want to block and
Options > Block .
To unblock a device, scroll right to Blocked devices ,
select a device and Options > Delete . To unblock all
blocked devices, select Options > Delete all .
If you reject a pairing request from another device, you
are asked if you want to block all future connection
requests from this device. If you accept the query, the
remote device is added to the list of blocked devices.
Remote SIM mode
Before the remote SIM mode can be activated, the two
devices must be paired and the pairing initiated from
the other device. When pairing, use a 16-digit passcode
and set the other device as authorized.
To use the remote SIM mode with a compatible car kit
enhancement, activate Bluetooth connectivity and
enable the use of the remote SIM mode with your
device. Activate the remote SIM mode from the other
device.
When the remote SIM mode is on in your device,
Remote SIM mode is displayed in the standby mode.
The connection to the wireless network is turned off,
as indicated by in the signal strength indicator area,
and you cannot use SIM card services or features
requiring cellular network coverage.
When the wireless device is in the remote SIM mode,
you can only use a compatible connected
enhancement, such as a car kit, to make or receive calls.
Your wireless device will not make any calls while in
this mode, except to the emergency numbers
programmed into your device. To make calls from your
device, you must leave the remote SIM mode. If the
device is locked, enter the lock code to unlock it.
To leave the remote SIM mode, press the power key,
and select Exit remote SIM mode .
USB
Press , and select Tools > Connectivity > USB .
To have the device ask the purpose of the connection
each time a compatible data cable is connected, select
Ask on connection > Yes .
42
Con
nectio
ns