Nokia N85 - Manual (Page 160)

not needed. In an ad hoc network, all devices must
use the same WLAN network name.
● WLAN security mode — Select the encryption
used: WEP , 802.1x , or WPA/WPA2 (802.1x and
WPA/WPA2 are not available for ad hoc networks).
If you select Open network , no encryption is used.
The WEP, 802.1x, and WPA functions can be used
only if the network supports them.
● Homepage — Enter the web address of the starting
page.
● Use access point — Select After confirmation if
you want the device to ask for confirmation before
the connection using this access point is created or
Automatically if you want the device to connect to
the destination using this access point
automatically.
The available options may vary.
Packet data settings
Press , and select Tools > Settings >
Connection > Packet data .
The packet data settings affect all access points using
a packet data connection.
● Packet data connection — If you select When
available and you are in a network that supports
packet data, the device registers to the packet data
network. Starting an active packet data connection
(for example, to send and receive e-mail) is quicker.
If there is no packet data coverage, the device
periodically tries to establish a packet data
connection. If you select When needed , the device
uses a packet data connection only if you start an
application or action that needs it.
● Access point — The access point name is needed
to use your device as a packet data modem to a
compatible computer.
● High speed packet access — Enable or disable the
use of HSDPA (network service) in UMTS networks.
Wireless LAN settings
Press , and select Tools > Settings >
Connection > Wireless LAN .
● Show WLAN availability — Select whether is
displayed in the standby mode when a wireless LAN
is available.
● Scan for networks — If you set Show WLAN
availability to Yes , select how often the device
searches for available wireless LANs and updates the
indicator.
To view advanced settings, select Options >
Advanced settings . Changing wireless LAN advanced
settings is not recommended.
SIP settings
Press , and select Tools > Settings >
Connection > SIP settings .
160
Se
ttings