Make a call using a voice tag, Voice dial with the headset, Listen to a voice tag – Nokia 6800 User Manual
Page 60
Nokia 6800 User Guide
53
Copyright © Nokia 2003
Contacts
Notes about voice tags
Before using voice dialing, note the following:
•
Voice tags are not language-dependent. They are dependent on the
speaker's voice.
•
Voice tags are sensitive to background noise. Record them and make calls
in a quiet environment.
•
When recording a voice tag or making a call by saying a voice tag, hold the
phone in the normal position near to your ear.
•
Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: You must say the name exactly as you said it when you recorded it.
This may be difficult in, for example, a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
Make a call using a voice tag
Note: Using the right selection key (
b
) to make a voice tag call will work
regardless of whether Contacts or Go to is assigned to the right selection key.
1
Press and hold
b
, or press and hold the down volume key.
When you hear several beeps and Please speak now appears, release the button.
2
Pronounce the voice tag clearly into the microphone. Searching appears. When
the phone finds the voice tag, Found appears, and the phone automatically dials
the number.
If the phone does not locate a number, No match found appears and you
return to the start screen.
Voice dial with the headset
After you have assigned voice tags to those entries you wish to dial, you can also
voice dial a number using a headset. (See “Enhancements” on page 110.)
1
At the start screen, press and hold the remote button on the headset.
Your phone beeps and Please speak now appears in the display.
2
Pronounce the voice tag into the microphone. When the phone finds the voice
tag, Found appears, and the phone automatically dials the number.
Listen to a voice tag
1
Select Menu >
Contacts > Voice tags.
2
Scroll to the name with the voice tag you want to hear.
3
Select Options > Playback.