Nokia E5-00 - Manual (Page 193)

EAP plug-ins
1 To define the EAP plug-in settings, select Options > New access point , and
define an access point that uses Wi-Fi as a data bearer.
2 Select 802.1x or WPA/WPA2 as the security mode.
3 Select WLAN security settings > WPA/WPA2 > EAP > EAP plug-in settings .
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN using the access point, select
the desired plug-in and Options > Enable . The EAP plug-ins enabled for use with
this access point have a check mark next to them. To not use a plug-in, select
Options > Disable .
To edit the EAP plug-in settings, select Options > Edit .
To change the priority of the EAP plug-in settings, select Options > Raise priority
to attempt to use the plug-in before other plug-ins when connecting to the network
with the access point, or Options
>
Lower priority to use this plug-in for network
authentication after attempting to use other plug-ins.
See the device help for more information on EAP plugins.
Session initiation protocol (SIP) settings
Select Menu > Ctrl. panel > Settings and Connection > SIP settings .
The session initiation protocol (SIP) is used for creating, modifying, and terminating
certain types of communication sessions with one or more participants (network
service). SIP profiles include settings for these sessions. The SIP profile used by
default for a communication session is underlined.
Settings 193