Nokia N97 - Manual (Page 107)

In application settings, you can edit the settings of some of
the applications in your device.
To edit the settings, you can also select
Options > Settings
in each application.
Device updates
With Device updates, you can connect to a server and receive
configuration settings for your device, create new server
profiles, view existing software version and device
information, or view and manage existing server profiles.
Select
Menu > Settings and Phone > Phone mgmt. >
Device updates .
If software updates over the air are supported by your
network, you may also be able to request updates through
the device.
You may receive server profiles and different configuration
settings from your service providers and company
information management department. These configuration
settings may include connection and other settings used by
different applications in your device.
Receive configuration settings
1 Select Options > Server profiles .
2 Go to a profile, and select Options > Start
configuration .
Create a server profile
Select Options > Server profiles > Options > New server
profile .
Delete a server profile
Select Options > Delete .
Security settings
Phone and SIM
You can define security settings for your device and SIM card.
For example, you can change access codes.
Select
Menu > Settings and Phone > Phone mgmt. >
Security settings > Phone and SIM card .
Select from the following:
PIN code request — When active, the code is requested each
time the device is switched on. Deactivating the PIN code
request may not be allowed by some SIM cards.
PIN code, PIN2 code, and Lock code — Change the PIN code,
PIN2 code, and lock code. These codes can only include
numbers from 0 to 9. Avoid using access codes similar to the
emergency numbers to prevent accidental dialing of the
emergency number. If you forget the PIN or PIN2 code,
contact your service provider. If you forget the lock code,
contact a Nokia Care point or your service provider.
Phone autolock period — To avoid unauthorized use, set
a time-out after which the device automatically locks. A
locked device cannot be used until the correct lock code is
entered. To deactivate this option, select None .
© 2011 Nokia. All rights reserved. 107