beautypg.com

Security settings, Phone and sim, Se ttings – Nokia N82 User Manual

Page 142

background image

is set to

Beep once

or

Silent

, automatic answer

is disabled.

Lights

— Set whether lights remain on or are

switched off after the time-out. This setting is not

available for all enhancements.

TV-out settings

To change the settings for a TV-out connection,

select

TV-Out

and from the following:

Default profile

— Set the profile that you want

activated each time you connect a Nokia Video

Connectivity Cable to your device.

TV screen size

— Select the aspect ratio of the

TV:

Normal

or

Widescreen

for widescreen TVs.

TV system

— Select the analogue video signal

system that is compatible with your TV.

Flicker filter

— To improve image quality on the

screen of your TV, select

On

. The flicker filter may

not diminish image flicker on all TV screens.

Security settings

Phone and SIM

Press , and select

Tools

>

Settings

>

General

>

Security

>

Phone and SIM card

.

PIN code request

— When active, the code is

requested each time the device is switched on.

Deactivating the PIN code request may not be

allowed by some SIM cards.

PIN code

,

PIN2 code

, and

Lock code

— You can

change the lock code, PIN code, and PIN2 code.

These codes can only include the numbers from

0 to 9.
If you forget the PIN or the PIN2 code, contact

your service provider. If you forget the lock code,

contact a Nokia Care point or your service

provider.

See "Access codes", p. 16.

Avoid using access codes similar to the

emergency numbers to prevent accidental

dialling of the emergency number.

Keypad autolock period

— Select whether the

keypad is locked when your device has been idle

for a certain period of time.

Tip: To lock or unlock the keypad manually,

press the left selection key, then *.

Phone autolock period

— To avoid

unauthorised use, you can set a time-out after

which the device automatically locks. A locked

device cannot be used until the correct lock code

is entered. To turn off the autolock period, select

None

.

Tip: To lock the device manually, press the

power key. A list of commands opens.

Select

Lock phone

.

Lock if SIM card changed

— You can set the

device to ask for the lock code when an unknown

SIM card is inserted into your device. The device

142

Se

ttings