Toshiba Tecra A4 (PTA42) - Manual (Page 75)

User’s Manual 4-20
Operating Basics
Open dialog box, if the modem and Telephony Current
Location region code do not match.
A warning dialog box is displayed if current settings for region code and
telephony location are incorrect.
Modem Selection
If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.
Dialing Properties
Select this item to display the dialing properties.
Connecting
To connect the internal modem cable, follow the steps below.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Connecting the internal modem
If you are using the computer in Japan, the Telecommunications Business
Law requires that you select Japan region mode. It is illegal to use the
modem in Japan with any other selection.
Modem Jack
Telephone
Jack
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as a DVD-ROM drive,CD-RW/DVD-ROM
drive or HDD connected to a 16-bit PC card, you might experience the
following modem problems:
■ Modem speed is slow or communication is interrupted.
■ Skips may occur in sound.