Toshiba Tecra A4 (PTA42) - Manual (Page 105)

User’s Manual 7-3
HW Setup and Passwords
To delete a user password:
1. Select Not Registered to display the following prompt:
Enter Password:
2. Enter the currently registered password. The character string you
enter is displayed as a string of asterisks.
Enter Password: ****
3. Click the OK button. If the character string you enter matches the reg-
istered password, the password option is reset and the display
changes to:
Not registered
If they do not match, the following message appears. You must repeat
step 1.
Incorrect Password!!!
You will not be able to access the password option in the HW Setup.
In this case you must turn the power off and back on to retry the pro-
cedure.
4. Follow the same procedures described in the earlier section, How to
set the password, to set a new user password.
Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device
Manager to make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional .
Display
This tab lets you customize your computer’s display settings for either the
internal LCD screen or for an external monitor.
If you click the OK button before entering the password, Registered will
appear on the display.
If you enter the password incorrectly three times in a row, the computer
need to shut off.
ECP Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to
ECP . (Default)
Standard
Bi-directional
This setting should be used with some other
parallel devices.