Toshiba Tecra A4 (PTA42) - Manual (Page 119)

User’s Manual 8-10
Optional Devices
Additional battery pack (12 Cell and 6 Cell)
You can increase the portability of the computer with additional battery
packs (12 Cell: PA3400U-1BAS/PA3400U-1BRS, 6 Cell: PA3399U-1BAS/
PA3399U-1BRS). If you’re away from an AC power source, you can
replace a low battery with a fully charged one. See Chapter 6, Power and
Power-Up Modes .
Additional AC adaptor
If you frequently transport the computer between different sites such as
your home and office, purchasing an AC adaptor for each location will
reduce the weight and bulk of your carrying load: PA3283U-2ACA/
PA3283E-2ACA.
USB FDD Kit
The 3 1/2" external FDD drive module can be connected to the USB port.
For details on connecting the 3 1/2" external diskette drive module, refer to
Chapter 4, Operating Basics .
Advanced Port Replicator III
In addition to the ports available on the computer, the Port Replicator
provides, audio line-out jack, line-in jack and separate ports for PS/2
mouse and PS/2 keyboard. The Port Replicator connects directly to the
docking interface on the bottom of the computer. The AC adaptor connects
the Port Replicator to a power source.
The following ports and accessories are available on the Port Replicator.
■ One RJ45 LAN jack
■ One RJ11 Modem jack
■ External monitor port
■ Parallel port
■ Serial port
■ PS/2 mouse port
■ PS/2 keyboard port
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer’s default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures
A triangle symbol on top of your computer indicates the docking position.
Position the computer so that this symbol is aligned with the triangle
symbol on the Advanced Port Replicator II to dock it.