Toshiba Tecra A4 (PTA42) - Manual (Page 106)

User’s Manual 7-4
HW Setup and Passwords
Power On Display
Lets you set the display to be used when the computer is booted
.
CPU
Dynamic CPU Frequency Mode
This option lets you choose from the following settings
:
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer. Select from the
following settings:
Auto-Selected Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
LCD+AnalogRGB Selects both the internal LCD and external
monitor for simultaneous display.
Dynamically
Switchable
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary. (Default)
Always High CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.
Always Low CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
FDD -> HDD ->
CD-ROM -> LAN
The computer looks for bootable files in the
following order: diskette drive, HDD, CD-ROM*
and LAN.
HDD -> FDD ->
CD-ROM -> LAN
The computer looks for bootable files in the
following order: HDD,diskette drive, CD-ROM*
and LAN. (default)
FDD -> CD-ROM ->
LAN -> HDD
The computer looks for bootable files in the
following order: diskette drive, CD-ROM*, LAN
and HDD.
HDD -> CD-ROM ->
LAN -> FDD
The computer looks for bootable files in the
following order: HDD, CD-ROM*, LAN and
diskette drive.