Toshiba Tecra A4 (PTA42) - Manual (Page 58)

User’s Manual 4-3
Operating Basics
Using optical media drives
The text and illustrations in this section refer primarily to the optical
DVD-ROM drive. However, operation is the same for all other optical media
drives. The full-size drive provides high-performance execution of CD/
DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used
for CD/DVD-ROM operation. When the computer is accessing a CD/DVD-
ROM, an indicator on the drive glows.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on
CD-RW/DVD-ROM drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive (+-R DL), refer also to the Writing CD/
DVDs on DVD Super Multi drive (+-R DL) section for precautions on writing
to CDs/DVDs.
Loading discs
To load CD/DVDs, follow the steps below and refer to figures below.
1. a. When the power is on, press the DVD-ROM eject button to open
the drawer slightly.
Pressing the DVD-ROM eject button
Use the WinDVD application to view DVD-Video discs.
Eject button