Toshiba Tecra M7 - Manual (Page 81)

User’s Manual 3-31
Features, Utilities and Options
TV
You can connect a television set to the S-Video out port on the computer.
Follow the steps below.
As an example, this is the setup method for the TOSHIBA Assist button.
Buttons other than the TOSHIBA Assist button can also be re-assigned.
Using the TOSHIBA Assist button
1. Connect the TV adaptor cable’s S-Video plug to the S-Video out port on
the computer.
Connecting the TV adaptor cable to the S-Video out port
2. Connect the TV adaptor cable’s S-Video plug to the S-Video out port on
the TV.
3. Press the TOSHIBA Assist button.
You can use the hot keys Fn + F5 to change the display device. Refer to
Chapter 5, The Keyboard .
To use “TV OUT” function by “TOSHIBA Assist button”, it is necessary to
change the settings of “TOSHIBA Assist button” in advance.
To open “TOSHIBA Controls” properties, click start, click Control Panel,
click Printers and Other Hardware, select “TOSHIBA Controls”, and set
“TV OUT” to “TOSHIBA Assist button” on “Buttons” tab.
S-Video out port
TV adaptor cable