Toshiba Slim Port Replicator III - Manual (Page 25)

User’s Manual EN-25
Slim Port Replicator III
Disclaimer
Information in this document is subject to change without notice. The
manufacturer does not make any representations or warranties (implied or
otherwise) regarding the accuracy and completeness of this document and
shall in no event be liable for any loss of profit or any commercial damage,
including but not limited to special, incidental, consequential, or other
damage.
January 2009, Rev1.0
Trademarks
Microsoft, Windows and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
Other brands and product names are trademarks or registered trademarks
of their respective companies.
Regulatory Statements
CE Compliance
This product is CE marked in accordance with the
requirements of the applicable EU Directives. Responsible
for CE-marking is Toshiba Europe GmbH, Hammfelddamm
8, 41460 Neuss, Germany. A copy of the official
Declaration of Conformity can be obtained from following
website: http://epps.toshiba-teg.com/
Working Environment
The Electromagnetic Compliance (EMC) of this product has been verified
typically for this product category for a so called Residential, Commercial &
Light Industry Environment. Any other working environment has not been
verified by Toshiba and the use of this product in these working
environments is maybe restricted or cannot be recommended. Possible
consequences of the use of this product in non verified working
environments can be: Disturbances of other products or of this product in
the nearby surrounding area with temporarily malfunction or data loss/
corruption as result. Example of non verified working environments and
related advices:
n Industrial environment (e.g. where three-phase 380V mains is being
used mainly): Danger of disturbances of this product due to possible
strong electromagnetic fields especially near to big machinery or power
units.