Toshiba Slim Port Replicator III - Manual (Page 18)

EN-18 User’s Manual
Slim Port Replicator III
Configuring audio recording ports (Microphone) in
Windows Vista ®
1. Right-click the speaker icon in the Notification Area of your Windows ®
desktop.
2. Select Recording Devices from the menu.
3. On the Recording tab of the dialog box, select one of the following:
n A Realtek High Definition Audio device—to use the docked
computer’s Microphone jack
n A USB Multimedia Audio Device device—to use the port
replicator’s Microphone jack
4. Click Set Default.
5. Click OK.
6. Connect your recording device to the port you enabled in step 3.
Configuring audio recording ports (Microphone) in
Windows ® XP
1. Right-click the speaker icon in the system tray of your Windows ®
desktop.
2. Select Adjust Audio Properties from the menu.
3. From the Sound recording drop-down list on the Audio tab of the
dialog box, select one of the following:
n A Realtek High Definition Audio device—to use the docked
computer’s Microphone jack
n A USB Multimedia Audio Device device—to use the port
replicator’s Microphone jack
4. Click OK.
5. Connect your recording device to the port you enabled in step 3.
Windows Vista ®
If the speaker icon is not visible in the Notification Area, access the audio
configuration utility through the Start menu as follows:
Click Start, Control Panel, Hardware and Sound, and then Sound.
NOTE
Windows ® XP
If the speaker icon is not visible in the Notification Area, access the audio
configuration utility through the Start menu as follows:
Click Start, Control Panel, Sounds, and then Audio Devices.
NOTE