Toshiba Slim Port Replicator III - Manual (Page 12)

EN-12 User’s Manual
Slim Port Replicator III
To supply AC power to the computer, connect the AC adaptor according
to the steps below:
a. Connect the power cord to the AC adaptor.
Figure 2-2 Connecting the power cord to the AC adaptor
b. Connect the AC adaptor to the Slim Port Replicator III.
Figure 2-3 Connecting the AC adaptor
c. Connect the power plug to a live electrical outlet.
The supplied power cord conforms to safety rules and regulations in
the region where the product was purchased. Do not use the AC
adaptor that was included with your computer. Always use the
Toshiba AC adaptor that was provided with this product or use
Toshiba recommended alternate adaptors to avoid any risk of fire
and/or other damage to the computer and/or port replicator. Use of
an incompatible AC adaptor could cause fire and/or damage to the
computer and/or port replicator, possibly resulting in serious injury.
TOSHIBA assumes no liability for any damage caused by use of an
incompatible adaptor.
WARNING
When you connect the AC adaptor to the Slim Port Replicator III,
always follow the steps in the exact order as described above.
Connecting the power cable to a live electrical outlet should be the
last step, otherwise the adaptor DC output plug could hold an
electrical charge and cause an electrical shock or minor bodily injury
when touched. As a general safety precaution, avoid touching any
metal parts.
WARNING