Toshiba Slim Port Replicator III - Manual (Page 11)

User’s Manual EN-11
Slim Port Replicator III
Chapter 2
Setting Up and Using the Slim Port
Replicator III
This chapter explains how to set up the Slim Port Replicator III and dock/
undock your computer.
Setting Up the Slim Port Replicator III
To set up the Slim Port Replicator III, follow the steps below.
1. Disconnect all cables/cords from your computer’s.
2. Align the computer’s connector and holes with the connector and Guide
Pins on the Slim Port Replicator III.
3. Press down on the computer to ensure a firm connection.
Figure 2-1 Connecting a computer to the Slim Port Replicator III
4. Attach the external devices or cables to the Slim Port Replicator III’s
ports.
5. Connect the included AC adaptor to the port replicator.
When the Slim Port Replicator III is connected to the computer, do not use
the ports of the computer. If you use the ports on both the computer and
the Slim Port Replicator III simultaneously, it may harm the computer and/
or data contained in it.
NOTE