Toshiba Slim Port Replicator III - Manual (Page 15)

User’s Manual EN-15
Slim Port Replicator III
Follow these steps to secure your computer and the Slim Port Replicator III:
1. Attach your security cable (purchased separately) to a desk or other
large object, following the instructions included with your security cable.
2. Set the computer lock switch on the Slim Port Replicator III to the
locked position.
3. Insert the lock end of the security cable into the Slim Port Replicator III’s
security lock slot.
4. Turn the key or set the combination on the end of the security cable.
Figure 2-9 Security lock
Connecting to a network
The network port on the Slim Port Replicator III provides a connection point
for a local area network (LAN) cable.
Connecting a LAN cable
To connect the LAN cableto the Slim Port Replicator III, follow the steps
below:
LAN speed Use this type of cable:
Gigabit Ethernet (1000 megabits/second) CAT5 or CAT5E
Fast Ethernet (100 megabits/second) CAT5
Ethernet LAN (10 megabits/second) CAT5 or CAT3
The computer may need to be configured before connecting to a LAN.
Check with your LAN administrator regarding set up procedures.
NOTE