Toshiba Slim Port Replicator III - Manual (Page 20)

EN-20 User’s Manual
Slim Port Replicator III
External display issues
IRefer also to your computer and monitor documentation.
Docked computer
enters Resume mode
and shuts down
If the computer’s internal temperature becomes
too high, the computer will automatically enter
Resume mode and shut down. Leave the
computer off until its interior reaches room
temperature.
If the computer has reached room temperature
and still does not start, or if it starts but shuts
down quickly, contact Toshiba support.
Docked computer shuts
down and its AC power
light is flashing
Indicates a problem with the heat dispersal
system of the computer. Please contact Toshiba
support.
Problem Solution(s)
Problem Solution(s)
External display does
not turn on
Press hotkeys Fn + F5 to change the display
setting. Choose a setting that displays
information to an external monitor. Refer to your
computer user’s manual for more information on
display settings.
Make sure that the monitor’s power switch is on.
Confirm that the monitor’s power cable is
plugged into a live electrical power outlet.
Try adjusting the contrast and brightness controls
on the monitor.
Cannot display
information to a
DVD-D and VGA
Monitor at the same
time
Check that the cables connecting the monitors
are firmly attached on both ends.
Some computer models do not support output to
DVI and VGA monitors simultaneously. Check
the documentation for your computer model.
Display error Check that the cable connecting the monitor to
the port replicator is firmly attached.
If the problem persists, contact Toshiba support.