Toshiba Slim Port Replicator III - Manual (Page 17)

User’s Manual EN-17
Slim Port Replicator III
Configuring audio playback ports (Line out) in
Windows Vista ®
1. Right-click the speaker icon in the Notification Area of your Windows ®
desktop.
2. Select Playback Devices from the menu.
3. On the Playback tab of the dialog box, select one of the following:
n A Realtek High Definition Audio device—to use the docked
computer’s Headphone jack
n A USB Multimedia Audio Device device—to use the port
replicator’s Line out jack
4. Click Set Default.
5. Click OK.
6. Connect your playback device to the port you enabled in step 3.
Configuring audio playback ports (Line out) in Windows ® XP
1. Right-click the speaker icon in the system tray of your Windows ®
desktop.
2. Select Adjust Audio Properties from the menu.
3. From the Sound playback drop-down list on the Audio tab of the
dialog box, select one of the following:
n A Realtek High Definition Audio—to use the docked computer’s
Headphone jack
n A USB Multimedia Audio Device—to use the port replicator’s Line
out jack
4. Click OK.
5. Connect your playback device to the port you enabled in step 3.
Windows Vista ®
If the speaker icon is not visible in the Notification Area, access the audio
configuration utility through the Start menu as follows:
Click Start, Control Panel, Hardware and Sound, and then Sound.
NOTE
Windows ® XP
If the speaker icon is not visible in the Notification Area, access the audio
configuration utility through the Start menu as follows:
Click Start, Control Panel, Sounds, and then Audio Devices.
NOTE