Toshiba DR20 - Manual (Page 31)

31 EN
In
tr
od
uct
ion
Con
n
e
c
tio
n
s
Basi
c Se
tup /
T
V
Vi
ew
Op
eration
Reco
rdi
n
g
Pl
ayb
ack
Ed
iti
n
g
F
unc
tio
n
Setu
p
O
the
rs
You can select either “Main” or “Sub” audio to record a
bilingual broadcast in video mode or +VR mode.
This setting is only for recording analogue channel.
1
In stop mode, press [SETUP]. Select “General
Setting” using [K
\ L], then press [ENTER\OK].
2
Select “Recording” using [K \ L], then press
[ENTER
\OK].
3
Select “Bilingual Recording Audio” using
[K
\ L], then press [ENTER\OK].
4
Select “Main” or “Sub” using [K \ L], then
press [ENTER \OK].
5
Press [SETUP] to exit.
Note
• If you want to record onto a VR mode disc, both “Main” and
“Sub” will be recorded regardless of your setting here. And
when you play back, you can choose either audio format or a
combination of both as your playback audio.
You can enjoy high quality sound recording. This function
works only when the recording mode is set at XP.
1
In stop mode, press [SETUP]. Select “General
Setting” using [K
\ L], then press [ENTER\OK].
2
Select “Recording” using [K
\ L], then press
[ENTER \OK].
3
Select “Recording Audio Select (XP)” using
[K
\ L], then press [ENTER\OK].
4
Select “PCM” or “Dolby Digital” using [K
\ L],
then press [ENTER
\OK].
5
Press [SETUP] to exit.
Note
• “PCM” stands for Pulse Code Modulation. It changes
analogue sound to digital sound without compressing audio
data.
• When the recording mode is set at other than XP, the unit
records “Dolby Digital” audio automatically even if you
selected “PCM”.
Basic Recording and One-touch Timer
Recording (OTR)
Follow the steps below to record a TV programme.
1
Press [
B ON\STANDBY] to turn on the unit.
Turn on the TV and be sure to select the input to which the
unit is connected.
2
Press [OPEN \CLOSE A] to open the disc tray.
3
Place the disc on the disc tray with its label
facing up. Be sure to align the disc with the disc
tray guide.
4
Press [OPEN \CLOSE A] to close the disc tray.
5
Select the recording mode using [REC MODE].
(See page 27.)
6
Press [INPUT SELECT
F] to select DVB,
analogue or external input mode, then select
the desired channel to record using
[PROG.
G \ H] or [the Number buttons].
Press [REC I] to start recording.
The “I” mark will be displayed on the TV screen briefly.
To pause the recording, press [PAUSE F]. Press
[PAUSE F] or [REC I] again to restart the recording.
This is a simple way to set the recording time in blocks of
30 minutes. Check that the disc you are recording onto
has enough space remaining for the time you set.
Press [REC I] repeatedly until the desired
recording time (30 minutes to 8 hours) appears
on the TV screen.
One-touch Timer Recording will start.
Setting Bilingual Recording Audio
Recording Audio Select (XP)
PCM: Records PCM audio for the best quality
sound.
Dolby Digital: Records Dolby Digital audio for good
quality sound.
DVD-RW DVD-RW DVD-RW
Video
DVD-R DVD-R DVD-R DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
Bilingual Recording Audio
Main
Sub
DVD-RW DVD-RW DVD-RW
Video
DVD-RW DVD-RW DVD-RW
VR
DVD-R DVD-R DVD-R DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
Recording Audio Select (XP)
PCM
Dolby Digital
DVB ANALOG
7
Basic Recording:
One-touch Timer Recording (OTR):
DVD-RW DVD-RW DVD-RW
Video
DVD-RW DVD-RW DVD-RW
VR
DVD-R DVD-R DVD-R DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
Disc tray guide
0:30
8:00 7:30
1:00
Normal
Recording
E7TE0BD_EN.book Page 31 Friday, March 5, 2010 5:08 PM