Toshiba Qosmio F10 - Manual (Page 175)

User’s Manual 10-13
Troubleshooting
Memory expansion
Refer also to Chapter 9, Optional Devices , for information on installing
memory modules.
Sound system
Refer also to documentation for your audio devices.
External Monitor
Refer also to Chapter 9, Optional Devices , and to your monitor’s
documentation.
Problem Procedure
Beeps sound in the
pattern of one, three,
three, one. Make sure the memory module installed in the
expansion slot is compatible with the computer.
If an incompatible module has been installed,
follow the steps below.
1. Turn off the power.
2. Disconnect the AC adaptor and all peripheral
devices.
3. Remove the battery pack.
4. Remove the memory module.
5. Install the battery pack and/or connect the AC
adaptor.
6. Turn on the power.
If problems persist, contact your dealer.
Problem Procedure
No sound is heard Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Problem Procedure
Monitor does not turn
on Make sure that the external monitor’s power
switch is on. Confirm that the external monitor’s
power cable is plugged into a working power
outlet.
No display Try adjusting the contrast and brightness controls
on the external monitor.
Press hot keys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.