Toshiba NB200 - Manual (Page 82)

User’s Manual 6-11
Power and Power-up Modes
To install a battery, follow the steps as detailed below:
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery safety
lock (2) is in its position.
Securing the battery pack
3. Turn your computer over.
Power-up modes
The computer has three power-up modes:
■ Boot: Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
■ Hibernation: Data in memory is saved to the hard disk.
■ Suspend: Data is maintained in the computer’s main memory.
Linux utilities
You can configure various settings associated with both Suspend Mode
and Hibernation Mode within the Power Management (Or you can access
from /usr/local/bin/hk_settings).
1. Battery Pack 2. Battery safety lock
1
4
5
2
1
Refer also to the section Turning off the power in Chapter 3, Getting
Started .