Toshiba NB200 - Manual (Page 60)

User’s Manual 4-11
Operating Basics
Enabling GPS
Your system includes built-in GPS (Global Positioning System)
functionality. GPS is a global satellite-based navigation system. It uses a
constellation of a number of satellites that transmit precise microwave
signals. That enables GPS receivers to determine their current locations,
the time and their velocity.
The following requirements are necessary to use the GPS functionality of
your notebook:
■ Please make sure that the Wireless communication in BIOS setup is
enabled.
■ A SIM card must be installed and the SIM Lock PIN must be entered to
enable GPS function.
■ You can enable GPS function in the pre-installed Wireless Manager.
■ From the View menu, choose GPS and press the GPS on button. It will
take some time until your GPS receiver has determined your location.
■ It is necessary to install a GPS software (not provided) to display
detailed location information. The software is also required to use the
notebook as navigation system.
Regulatory Information
FCC compliance
FCC compliance does not apply to this product with a Wireless WAN
Module installed.
Industry Canada (IC) compliance
Industry Canada (IC) compliance does not apply to this product with a
Wireless WAN Module installed.
Please note that GPS function may not be supported depending on the
model you purchased.