Toshiba Magnia 3310 - Manual (Page 66)

Setup
Windows 2000 Quick Installation 62
Setup Option
The Setup Option screen appears. Use this screen to specify the
setup installation features you want enabled during the installation
process.
Setup Option screen
Beep sound in case of disk change
Sounds an audible alert (beep) to change storage media (CD-
ROM and diskette).
Start installation according to parameter settings at boot time
When a Configuration Save Disk containing the configuration
information is inserted into the floppy disk drive, and SST is
started up from CD-ROM, a confirmation message is displayed,
and installation is started immediately. The current configuration
information is used. However, if the required devices are not
mounted, device drivers and other information will not be
installed.