Toshiba Magnia 3310 - Manual (Page 107)

Hardware Diagnostics
Items of Hardware Diagnostics
103
For the definition of ERROR NAME and STS, refer to the table
[SCSI HDD TEST (HDD)] in [Chapter 4 - 06.SCSI HDD TEST].
For the definition of Details, refer to following description:
*Definition of CD-ROM TEST Details Information
(DETAILS=XXXXXXXXXXXXXX)
AAA BB CC DD EE FF GG
AAA : Case of IDE CD-ROM device
PrM
(Primary, Master)
PrS (Primary, Slave)
ScM (Secondary, Master)
ScS (Secondary, Slave)
BB : Sense data (0 byte)
CC : Sense data (1 byte)
DD : Sense data (2 byte) [Sense Key]
EE : Sense data (12 byte)[Expansion Sense code]
FF : Sense data (13 byte)[Expansion Sense code]
GG : Sense data (14 byte)
NOTE: On the MAGNIA3310, the CD-ROM test tests only
one IDE CD-ROM drive.
The CD-ROM test searches for CD-ROM device, according
to the order as shown below, and tests the first found CD-
ROM device only.
IDE (PrM, PrS, ScM, ScS), SCSI (ID0, ID1,…)
[11. SAF-TE TEST]
To check the SAF-TE function and the status LED of the hard disk
drives.
[01. SAF-TE test]
It detects SAF-TE controller and checks the operation by
flashing the LED for each hard disk drive.