Toshiba Magnia 3310 - Manual (Page 110)

Hardware Diagnostics
Items of Hardware Diagnostics 106
PASS COUNT
If the test parameter "Test Loop" is set as "Yes" in the test, the pass
count is displayed.
CNT
It shows the number assigned, according to the order of
occurrence of the errors.
TEST
XXX XX XX
digits 1-3 :It shows the abbreviation of the test in which the error
occurred.
digits 4-5: It shows the subtest number in which the error
occurred.
digits 6-7: It shows the step number in which the error occurred.
(Depending on the test, Digits 6-7 are not always
displayed.)
PASS
It shows the pass count where the error occurred.
MEMORY TEST RAM NPX TEST NPX
KEYBOARD TEST KBD CACHE MEMORY TEST CAH
DISPLAY TEST CRT SCSI TEST SCS
FLOPPY DISK TEST FDD CD-ROM TEST CDR
IDE HDD TEST IDE SAF-TE TEST SAF
SCSI HDD TEST HDD BMC TEST BMC