Toshiba Magnia 3310 - Manual (Page 51)

Setup
Windows 2000 Quick Installation
47
TCP/IP Protocol Settings -1
If you have specified TCP/IP as the network communication
protocol on the Network Protocol Setting -1 screen, the TCP/IP
Protocol Settings -1 screen appears. The TCP/IP Protocol Settings
-1 screen allows you to specify the IP Address, Subnet Mask, and
Default Gateway Address for On-board 1Gbps LAN Adapter
(Ether1).
TCP/IP Protocol Settings -1 screen
To complete the TCP/IP protocol settings for On-board 1Gbps
LAN Adapter (Ether1), enter the IP Address for On-board 1Gbps
LAN Adapter (Ether1).
To have a DHCP server automatically assign the IP addresses,
Subnet Masks and Default Gateway for On-board 1Gbps LAN
Adapter (Ether1), select "Assign an IP Address from DHCP
Server".
Otherwise, do not select "Assign an IP Address from DHCP
Server" and specify manually the IP address, Subnet Mask, and
Default Gateway Address.
NOTE: For IP Address, Subnet Mask and Default Gateway
Address, you must use decimal numbers (from 0 to 255).