Using optical disc drives, Using optical disc drives -11, Loading discs – Toshiba Satellite U200 User Manual

Page 79

User’s Manual

4-11

Operating Basics

Using optical disc drives

The full-size drive provides high-performance execution of

CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm

(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used

for CD/DVD-ROM operation. When the computer is accessing a

CD/DVD-ROM, an indicator on the drive glows.

If you have a DVD-ROM&CD-R/RW drive, refer also to the

section for precautions on writing to CDs.

If you have a DVD Super Multi drive, refer also to the

section for precautions on writing to CDs/DVDs.

Loading discs

To load CD/DVDs, follow the steps below.
1. When the computer’s power is on, press the eject button to open

the disc tray slightly.

Pressing the eject button

2. Grasp the disc tray gently and pull until it is fully opened.

Pulling the disc tray open

Use the WinDVD application to view DVD-Video discs.

Eject button

Disc tray