Toshiba Satellite U200 - Manual (Page 78)

4-10 User’s Manual
Operating Basics
Using the USB floppy disk drive (optional)
An optional USB floppy disk drive accommodates 1.44-megabyte or
720-kilobyte floppy disks and connects to the USB port. Refer to Chapter 2,
The Grand Tour , for more information. It is supplied as standard with some
models and as an option with others.
Connecting the USB floppy disk drive
To connect the drive, plug the floppy disk drive’s USB connector into a
computer’s USB port.
Connecting the USB floppy disk drive
Disconnecting USB floppy disk drive
When you have finished using the USB floppy disk drive, follow the
procedures below to disconnect it:
1. Wait for the indicator light to go out to make sure all floppy disk activity
has stopped.
2. Click the Safely Remove Hardware icon on the Task Bar.
3. Click USB floppy disk drive device that you want remove.
4. Pull the floppy disk drive’s USB connector out of the computer’s USB
port.
Make sure the USB connector is properly aligned with the socket. Do not
try to force the connection, doing so can damage the connecting pins.
USB connector
USB port
If you connect the USB floppy disk drive after turning on the computer, it
will take about 10 seconds for the computer to recognize the drive. Do not
disconnect and reconnect before 10 seconds has elapsed.
If you disconnect the USB floppy disk drive or turn off the power while the
computer is accessing the drive you may lose data or damage the floppy
disk or the drive.